huangjin/AC63_BT_SDK
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
AC63_BT_SDK/apps/mesh/examples/generic_onoff_server.c

523 lines
15 KiB
C
Raw Normal View History

原始文件
2025-02-18 15:40:42 +08:00
/* Bluetooth Mesh */
/*
* Copyright (c) 2017 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "btstack/bluetooth.h"
#include "system/includes.h"
#include "bt_common.h"
#include "api/sig_mesh_api.h"
#include "model_api.h"
#include "feature_correct.h"
#define LOG_TAG "[Mesh-OnOff_srv]"
#define LOG_ERROR_ENABLE
#define LOG_DEBUG_ENABLE
#define LOG_INFO_ENABLE
/* #define LOG_DUMP_ENABLE */
#define LOG_CLI_ENABLE
#include "debug.h"
#if TCFG_AUDIO_ENABLE
#include "tone_player.h"
#include "media/includes.h"
#include "key_event_deal.h"
#endif/*TCFG_AUDIO_ENABLE*/
#if (CONFIG_MESH_MODEL == SIG_MESH_GENERIC_ONOFF_SERVER)
/**
* @brief Config current node features(Relay/Proxy/Friend/Low Power)
*/
/*-----------------------------------------------------------*/
#define BT_MESH_FEAT_SUPPORTED_TEMP ( \
BT_MESH_FEAT_RELAY | \
BT_MESH_FEAT_PROXY | \
0 \
)
/**
* @brief Conifg complete local name
*/
/*-----------------------------------------------------------*/
#define BLE_DEV_NAME 'O', 'n', 'O', 'f', 'f', '_', 's', 'r', 'v'
/**
* @brief Conifg MAC of current demo
*/
/*-----------------------------------------------------------*/
#define CUR_DEVICE_MAC_ADDR 0x852233445567
/*
* Publication Declarations
*
* The publication messages are initialized to the
* the size of the opcode + content
*
* For publication, the message must be in static or global as
* it is re-transmitted several times. This occurs
* after the function that called bt_mesh_model_publish() has
* exited and the stack is no longer valid.
*
* Note that the additional 4 bytes for the AppMIC is not needed
* because it is added to a stack variable at the time a
* transmission occurs.
*
*/
BT_MESH_MODEL_PUB_DEFINE(gen_onoff_pub_srv, NULL, 2 + 2);
BT_MESH_HEALTH_PUB_DEFINE(health_pub, 0);
/* Model Operation Codes */
#define BT_MESH_MODEL_OP_GEN_ONOFF_GET BT_MESH_MODEL_OP_2(0x82, 0x01)
#define BT_MESH_MODEL_OP_GEN_ONOFF_SET BT_MESH_MODEL_OP_2(0x82, 0x02)
#define BT_MESH_MODEL_OP_GEN_ONOFF_SET_UNACK BT_MESH_MODEL_OP_2(0x82, 0x03)
#define BT_MESH_MODEL_OP_GEN_ONOFF_STATUS BT_MESH_MODEL_OP_2(0x82, 0x04)
/* Company Identifiers (see Bluetooth Assigned Numbers) */
#define BT_COMP_ID_LF 0x05D6 // Zhuhai Jieli technology Co.,Ltd
/* LED NUMBER */
#define LED0_GPIO_PIN 0
// -----------------------------------------------------------
struct onoff_state {
u8_t current;
u8_t previous;
u8_t led_gpio_pin;
};
struct _switch {
u8_t sw_num;
u8_t onoff_state;
};
static void gen_onoff_get(struct bt_mesh_model *model,
struct bt_mesh_msg_ctx *ctx,
struct net_buf_simple *buf);
static void gen_onoff_set(struct bt_mesh_model *model,
struct bt_mesh_msg_ctx *ctx,
struct net_buf_simple *buf);
static void gen_onoff_set_unack(struct bt_mesh_model *model,
struct bt_mesh_msg_ctx *ctx,
struct net_buf_simple *buf);
static void health_attention_on(struct bt_mesh_model *mod);
static void health_attention_off(struct bt_mesh_model *mod);
static u8_t trans_id;
const int config_bt_mesh_features = BT_MESH_FEAT_SUPPORTED;
static u8 ble_mesh_adv_name[32 + 2];
const uint8_t mesh_default_name[] = {
// Name
BYTE_LEN(BLE_DEV_NAME) + 1, BLUETOOTH_DATA_TYPE_COMPLETE_LOCAL_NAME, BLE_DEV_NAME,
};
static struct onoff_state onoff_state[] = {
{ .led_gpio_pin = LED0_GPIO_PIN },
};
const u8 led_use_port[] = {
IO_PORTA_01,
};
static const struct bt_mesh_send_cb rsp_msg_cb = {
// .user_intercept = respond_messsage_schedule,//for compiler, not used now.
};
static const struct bt_mesh_health_srv_cb health_srv_cb = {
.attn_on = health_attention_on,
.attn_off = health_attention_off,
};
static struct bt_mesh_health_srv health_srv = {
.cb = &health_srv_cb,
};
/*
* OnOff Model Server Op Dispatch Table
*
*/
static const struct bt_mesh_model_op gen_onoff_srv_op[] = {
{ BT_MESH_MODEL_OP_GEN_ONOFF_GET, BT_MESH_LEN_EXACT(0), gen_onoff_get },
{ BT_MESH_MODEL_OP_GEN_ONOFF_SET, BT_MESH_LEN_MIN(2), gen_onoff_set },
{ BT_MESH_MODEL_OP_GEN_ONOFF_SET_UNACK, BT_MESH_LEN_MIN(2), gen_onoff_set_unack },
BT_MESH_MODEL_OP_END,
};
//-----------------------------------------------------------
void get_mesh_adv_name(u8 *len, u8 **data)
{
//r_printf("==============================%s,%d\n", __FUNCTION__, __LINE__);
//put_buf(ble_mesh_adv_name,32);
*len = ble_mesh_adv_name[0] + 1;
*data = ble_mesh_adv_name;
}
/*
* Generic OnOff Model Server Message Handlers
*
* Mesh Model Specification 3.1.1
*
*/
static void respond_messsage_schedule(u16 *delay, u16 *duration, void *cb_data)
{
/* Mesh_v1.0 <3.7.4.1 Transmitting an access message>
*
* If the message is sent in response to a received message
* that was sent to a unicast address, the node should transmit
* the response message with a random delay between 20 and 50 milliseconds.
*
* If the message is sent in response to a received message
* that was sent to a group address or a virtual address,
* the node should transmit the response message with
* a random delay between 20 and 500 milliseconds.
*/
u16 delay_ms;
u16 dst_addr = (u16)cb_data;
pseudo_random_genrate((u8 *)&delay_ms, 2);
if (BT_MESH_ADDR_IS_UNICAST(dst_addr)) {
delay_ms = btctler_get_rand_from_assign_range(delay_ms, 20, 50);
} else {
delay_ms = btctler_get_rand_from_assign_range(delay_ms, 20, 200);
}
*delay = delay_ms;
log_info("respond_messsage delay =%u ms", delay_ms);
}
static void gen_onoff_get(struct bt_mesh_model *model,
struct bt_mesh_msg_ctx *ctx,
struct net_buf_simple *buf)
{
NET_BUF_SIMPLE_DEFINE(msg, 2 + 1 + 4);
struct onoff_state *onoff_state = model->rt->user_data;
log_info("addr 0x%04x onoff 0x%02x\n",
bt_mesh_model_elem(model)->rt->addr, onoff_state->current);
bt_mesh_model_msg_init(&msg, BT_MESH_MODEL_OP_GEN_ONOFF_STATUS);
buffer_add_u8_at_tail(&msg, onoff_state->current);
if (bt_mesh_model_send(model, ctx, &msg, &rsp_msg_cb, (void *)ctx->recv_dst)) {
log_info("Unable to send On Off Status response\n");
}
}
static void gen_onoff_set_unack(struct bt_mesh_model *model,
struct bt_mesh_msg_ctx *ctx,
struct net_buf_simple *buf)
{
struct net_buf_simple *msg = model->pub->msg;
struct onoff_state *onoff_state = model->rt->user_data;
int err;
onoff_state->current = buffer_pull_u8_from_head(buf);
log_info("addr 0x%02x state 0x%02x\n",
bt_mesh_model_elem(model)->rt->addr, onoff_state->current);
/* log_info_hexdump((u8 *)onoff_state, sizeof(*onoff_state)); */
gpio_pin_write(onoff_state->led_gpio_pin,
onoff_state->current);
#if PACKET_LOSS_RATE_TEST
static uint32_t i = 0;
i++;
log_info(">>> recv num %d ", i);
#endif
#if 0
/*
* If a server has a publish address, it is required to
* publish status on a state change
*
* See Mesh Profile Specification 3.7.6.1.2
*
* Only publish if there is an assigned address
*/
if (onoff_state->previous != onoff_state->current &&
model->pub->addr != BT_MESH_ADDR_UNASSIGNED) {
log_info("publish last 0x%02x cur 0x%02x\n",
onoff_state->previous, onoff_state->current);
onoff_state->previous = onoff_state->current;
bt_mesh_model_msg_init(msg,
BT_MESH_MODEL_OP_GEN_ONOFF_STATUS);
buffer_add_u8_at_tail(msg, onoff_state->current);
err = bt_mesh_model_publish(model);
if (err) {
log_info("bt_mesh_model_publish err %d\n", err);
}
}
#endif /* */
}
static void gen_onoff_set(struct bt_mesh_model *model,
struct bt_mesh_msg_ctx *ctx,
struct net_buf_simple *buf)
{
log_info("gen_onoff_set\n");
gen_onoff_set_unack(model, ctx, buf);
gen_onoff_get(model, ctx, buf);
}
static void health_attention_on(struct bt_mesh_model *mod)
{
log_info(">>>>>>>>>>>>>>>>>health_attention_on\n");
for (u8 i = 0; i < sizeof(led_use_port); i++) {
led_blink_worker_on(led_use_port[i]);
}
}
static void health_attention_off(struct bt_mesh_model *mod)
{
log_info(">>>>>>>>>>>>>>>>>health_attention_off\n");
for (u8 i = 0; i < sizeof(led_use_port); i++) {
led_blink_worker_off(led_use_port[i]);
}
}
/*
*
* Element Model Declarations
*
* Element 0 Root Models
*/
static struct bt_mesh_model root_models[] = {
BT_MESH_MODEL_CFG_SRV,
BT_MESH_MODEL_HEALTH_SRV(&health_srv, &health_pub),
BT_MESH_MODEL(BT_MESH_MODEL_ID_GEN_ONOFF_SRV, gen_onoff_srv_op, &gen_onoff_pub_srv, &onoff_state[0]),
};
/*
* LED to Server Model Assigmnents
*/
static struct bt_mesh_model *mod_srv_sw[] = {
&root_models[2],
};
/*
* Root and Secondary Element Declarations
*/
static struct bt_mesh_elem elements[] = {
BT_MESH_ELEM(0, root_models, BT_MESH_MODEL_NONE),
};
static const struct bt_mesh_comp composition = {
.cid = BT_COMP_ID_LF,
.elem = elements,
.elem_count = ARRAY_SIZE(elements),
};
static const u8_t dev_uuid[16] = {MAC_TO_LITTLE_ENDIAN(CUR_DEVICE_MAC_ADDR)};
static const struct bt_mesh_prov prov = {
.uuid = dev_uuid,
#if 0
.output_size = 6,
.output_actions = (BT_MESH_DISPLAY_NUMBER | BT_MESH_DISPLAY_STRING),
.output_number = output_number,
.output_string = output_string,
#else
.output_size = 0,
.output_actions = 0,
.output_number = 0,
#endif
.complete = prov_complete,
.reset = prov_reset,
};
static bool server_publish(struct _switch *sw)
{
struct bt_mesh_model *mod_srv;
struct bt_mesh_model_pub *pub_srv;
mod_srv = mod_srv_sw[sw->sw_num];
pub_srv = mod_srv->pub;
/* If unprovisioned, just call the set function.
* The intent is to have switch-like behavior
* prior to provisioning. Once provisioned,
* the button and its corresponding led are no longer
* associated and act independently. So, if a button is to
* control its associated led after provisioning, the button
* must be configured to either publish to the led's unicast
* address or a group to which the led is subscribed.
*/
u16 primary_addr = get_primary_addr();
if (primary_addr == BT_MESH_ADDR_UNASSIGNED) {
NET_BUF_SIMPLE_DEFINE(msg, 1);
struct bt_mesh_msg_ctx ctx = {
.addr = sw->sw_num + primary_addr,
};
/* This is a dummy message sufficient
* for the led server
*/
buffer_add_u8_at_tail(&msg, sw->onoff_state);
gen_onoff_set_unack(mod_srv, &ctx, &msg);
return TRUE;
}
return FALSE;
}
/*
* Button Pressed Worker Task
*/
static void button_pressed_worker(struct _switch *sw)
{
if (sw->sw_num >= composition.elem_count) {
log_info("sw_num over elem_count");
return;
}
if (server_publish(sw)) {
return;
}
}
static void mesh_init(void)
{
log_info("--func=%s", __FUNCTION__);
bt_conn_cb_register(bt_conn_get_callbacks());
int err = bt_mesh_init(&prov, &composition);
if (err) {
log_error("Initializing mesh failed (err %d)\n", err);
return;
}
if (IS_ENABLED(CONFIG_BT_SETTINGS)) {
settings_load();
}
bt_mesh_prov_enable(BT_MESH_PROV_GATT);
}
void input_key_handler(u8 key_status, u8 key_number)
{
struct _switch press_switch;
log_info("key_number=0x%x", key_number);
/*Audio Test Demo*/
#if (TCFG_AUDIO_ENABLE && MESH_AUDIO_TEST)
if (key_status == KEY_EVENT_CLICK && key_number == TCFG_ADKEY_VALUE0) {
log_info(">>>key0:mic/encode test\n");
//AC695N/AC696N mic test
/* extern int audio_adc_open_demo(void); */
/* audio_adc_open_demo(); */
//AD697N/AC897N/AC698N mic test
/* extern void audio_adc_mic_demo(u8 mic_idx, u8 gain, u8 mic_2_dac); */
/* audio_adc_mic_demo(1, 1, 1); */
/*encode test*/
/*
//AC695N/AC696N/AD697N/AC897N/AC698N
编码测试类型：
AUDIO_CODING_OPUS
AUDIO_CODING_SPEEX
AUDIO_CODING_WAV
AUDIO_CODING_LC3
AUDIO_CODING_SBC
AUDIO_CODING_MSBC */
/*
//AC632N
编码测试类型：
AUDIO_CODING_LC3
AUDIO_CODING_USBC
*/
extern int audio_demo_enc_open(int (*demo_output)(void *priv, void *buf, int len), u32 code_type, u8 ai_type);
audio_demo_enc_open(NULL, AUDIO_CODING_USBC, 0);
}
if (key_status == KEY_EVENT_CLICK && key_number == TCFG_ADKEY_VALUE1) {
log_info(">>>key1:tone/decode test\n");
//AC695N/AC696N tone play test
/* tone_play_by_path(TONE_NORMAL, 1); */
/* tone_play_by_path(TONE_BT_CONN, 1); */
//AD697N/AC897N/AC698N tone play test
/* tone_play(TONE_NUM_8, 1); */
/* tone_play(TONE_SIN_NORMAL, 1); */
// decode test
/*
//AC695N/AC696N/AD697N/AC897N/AC698N
解码测试类型：
AUDIO_CODING_LC3
//AC632N
解码测试类型：(需要在audio_decode.c中配置)
AUDIO_CODING_LC3
AUDIO_CODING_USBC
*/
extern void demo_frame_test(void);
demo_frame_test();
}
#else
if ((key_number == 2) && (key_status == KEY_EVENT_LONG)) {
log_info("\n <bt_mesh_reset> \n");
bt_mesh_reset();
return;
}
switch (key_status) {
case KEY_EVENT_CLICK:
log_info(" [KEY_EVENT_CLICK] ");
press_switch.sw_num = key_number;
press_switch.onoff_state = 1;
button_pressed_worker(&press_switch);
break;
case KEY_EVENT_LONG:
log_info(" [KEY_EVENT_LONG] ");
press_switch.sw_num = key_number;
press_switch.onoff_state = 0;
button_pressed_worker(&press_switch);
break;
case KEY_EVENT_HOLD:
log_info(" [KEY_EVENT_HOLD] ");
break;
default :
return;
}
#endif/*TCFG_AUDIO_ENABLE*/
}
void bt_ble_init(void)
{
u8 bt_addr[6] = {MAC_TO_LITTLE_ENDIAN(CUR_DEVICE_MAC_ADDR)};
bt_mac_addr_set(bt_addr);
u8 *name_p = &ble_mesh_adv_name[2];
int ret = syscfg_read(CFG_BT_NAME, name_p, 32);
if (ret <= 0) {
log_info("read bt name err\n");
memcpy(ble_mesh_adv_name, mesh_default_name, sizeof(mesh_default_name));
} else {
ble_mesh_adv_name[0] = strlen(name_p) + 1;
ble_mesh_adv_name[1] = BLUETOOTH_DATA_TYPE_COMPLETE_LOCAL_NAME;
put_buf(name_p, 32);
}
mesh_set_gap_name(name_p);
log_info("mesh_name:%s\n", name_p);
mesh_setup(mesh_init);
if (BT_MODE_IS(BT_BQB)) {
ble_bqb_test_thread_init();
}
}
#endif /* (CONFIG_MESH_MODEL == SIG_MESH_GENERIC_ONOFF_SERVER) */
Reference in New Issue Copy Permalink