#ifndef APP_CONFIG_H
#define APP_CONFIG_H

/*
 * 系统打印总开关
 */


#ifdef CONFIG_RELEASE_ENABLE
#define LIB_DEBUG    0
#else
#define LIB_DEBUG    1
#endif
#define CONFIG_DEBUG_LIB(x)         (x & LIB_DEBUG)

#define CONFIG_DEBUG_ENABLE

//app case 选择,只选1,要配置对应的board_config.h
#define CONFIG_APP_KEYBOARD                 1//hid按键 ,default case
#define CONFIG_APP_KEYFOB                   0//自拍器,  board_ac6368a,board_6318,board_6379b
#define CONFIG_APP_MOUSE_SINGLE             0//单模切换
#define CONFIG_APP_MOUSE_DUAL               0//同时开双模
#define CONFIG_APP_STANDARD_KEYBOARD        0//标准HID键盘,board_ac6351d
#define CONFIG_APP_KEYPAGE                  0//翻页器
#define CONFIG_APP_GAMEBOX                  0//吃鸡王座
#define CONFIG_APP_REMOTE_CONTROL           0//语音遥控
#define CONFIG_APP_IDLE                     0//IDLE

//edr sniff模式选择; sniff参数需要调整,移植可具体参考app_keyboard.c
#if CONFIG_APP_MOUSE_SINGLE || CONFIG_APP_MOUSE_DUAL || CONFIG_APP_STANDARD_KEYBOARD || CONFIG_APP_REMOTE_CONTROL //|| CONFIG_APP_KEYBOARD
#define SNIFF_MODE_RESET_ANCHOR             1//键盘鼠标sniff模式,固定小周期发包,多按键响应快
#else
#define SNIFF_MODE_RESET_ANCHOR             0//待机固定500ms sniff周期,待机功耗较低,按键唤醒有延时
#endif

//V5.0 扩展广播/扫描使能
#define CONFIG_BT_EXT_ADV_MODE            0

#define CONFIG_HOGP_COMMON_ENABLE          1 //公共的hogp

//蓝牙BLE配置
#define CONFIG_BT_GATT_COMMON_ENABLE       1 //配置使用gatt公共模块
#define CONFIG_BT_SM_SUPPORT_ENABLE        1 //配置是否支持加密
#define CONFIG_BT_GATT_CLIENT_NUM          0 //配置主机client个数(app not support)
#define CONFIG_BT_GATT_SERVER_NUM          1 //配置从机server个数
#define CONFIG_BT_GATT_CONNECTION_NUM      (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
#define CONFIG_BLE_HIGH_SPEED              0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长

#if CONFIG_BT_GATT_CONNECTION_NUM > 8
#error "SUPPORT MAX IS 8 !!!"
#endif

//BLE做主机，使能是否支持搜索连接JL的测试盒
#define SUPPORT_TEST_BOX_BLE_MASTER_TEST_EN	   0

//APP应用默认配置
#define TCFG_AEC_ENABLE                     1

#define TCFG_MEDIA_LIB_USE_MALLOC		    1

#include "board_config.h"

#include "usb_common_def.h"

#include "btcontroller_mode.h"

#include "user_cfg_id.h"

#define APP_PRIVATE_PROFILE_CFG

#if CONFIG_BT_EXT_ADV_MODE
#define APP_TO_ALLOW_EXT_ADV
#endif

#if (CONFIG_BT_MODE == BT_NORMAL)
//enable dut mode,need disable sleep(TCFG_LOWPOWER_LOWPOWER_SEL = 0)
#define TCFG_NORMAL_SET_DUT_MODE                  0
#if TCFG_NORMAL_SET_DUT_MODE
#undef  TCFG_LOWPOWER_LOWPOWER_SEL
#define TCFG_LOWPOWER_LOWPOWER_SEL                0
#if TCFG_USER_EDR_ENABLE && TCFG_USER_BLE_ENABLE
//不支持同时打开
#error "dut need disable one bt!!!"
#endif

#endif//if TCFG_NORMAL_SET_DUT_MODE

#else

#undef  TCFG_BD_NUM
#define TCFG_BD_NUM						          1

#undef  TCFG_USER_TWS_ENABLE
#define TCFG_USER_TWS_ENABLE                      0     //tws功能使能

#undef  TCFG_USER_BLE_ENABLE
#define TCFG_USER_BLE_ENABLE                      1     //BLE功能使能

#undef  TCFG_AUTO_SHUT_DOWN_TIME
#define TCFG_AUTO_SHUT_DOWN_TIME		          0

#undef  TCFG_SYS_LVD_EN
#define TCFG_SYS_LVD_EN						      0

#undef  TCFG_LOWPOWER_LOWPOWER_SEL
#define TCFG_LOWPOWER_LOWPOWER_SEL                0

#undef TCFG_AUDIO_DAC_LDO_VOLT
#define TCFG_AUDIO_DAC_LDO_VOLT				DACVDD_LDO_2_65V

#undef TCFG_LOWPOWER_POWER_SEL
#define TCFG_LOWPOWER_POWER_SEL				PWR_LDO15

#undef  TCFG_PWMLED_ENABLE
#define TCFG_PWMLED_ENABLE					DISABLE_THIS_MOUDLE

#undef  TCFG_ADKEY_ENABLE
#define TCFG_ADKEY_ENABLE                   DISABLE_THIS_MOUDLE

#undef  TCFG_IOKEY_ENABLE
#define TCFG_IOKEY_ENABLE					DISABLE_THIS_MOUDLE

#undef TCFG_TEST_BOX_ENABLE
#define TCFG_TEST_BOX_ENABLE			    0

#undef TCFG_AUTO_SHUT_DOWN_TIME
#define TCFG_AUTO_SHUT_DOWN_TIME	        0

#undef TCFG_POWER_ON_NEED_KEY
#define TCFG_POWER_ON_NEED_KEY		        0

#undef TCFG_UART0_ENABLE
#define TCFG_UART0_ENABLE					DISABLE_THIS_MOUDLE

#endif


#define BT_FOR_APP_EN                     0

//需要app(BLE)升级要开一下宏定义
#if CONFIG_APP_OTA_ENABLE
#define RCSP_BTMATE_EN                    1
#define RCSP_UPDATE_EN                    1
#define UPDATE_MD5_ENABLE                 0
#else
#define RCSP_BTMATE_EN                    0
#define RCSP_UPDATE_EN                    0
#define UPDATE_MD5_ENABLE                 0
#endif


#ifdef CONFIG_SDFILE_ENABLE
#define SDFILE_DEV				"sdfile"
#define SDFILE_MOUNT_PATH     	"mnt/sdfile"

#if (USE_SDFILE_NEW)
#define SDFILE_APP_ROOT_PATH       	SDFILE_MOUNT_PATH"/app/"  //app分区
#define SDFILE_RES_ROOT_PATH       	SDFILE_MOUNT_PATH"/res/"  //资源文件分区
#else
#define SDFILE_RES_ROOT_PATH       	SDFILE_MOUNT_PATH"/C/"
#endif

#endif
#if TCFG_USER_EDR_ENABLE
#if RCSP_BTMATE_EN
#define CONFIG_BT_RX_BUFF_SIZE  (3 * 512)
#define CONFIG_BT_TX_BUFF_SIZE  (3 * 512)
#else
#define CONFIG_BT_RX_BUFF_SIZE  (5 * 512)
#define CONFIG_BT_TX_BUFF_SIZE  (5 * 512)
#endif
#else
#define CONFIG_BT_RX_BUFF_SIZE  (0)
#define CONFIG_BT_TX_BUFF_SIZE  (0)
#endif

#if (CONFIG_BT_MODE != BT_NORMAL)
////bqb 如果测试3M tx buf 最好加大一点
#undef  CONFIG_BT_TX_BUFF_SIZE
#define CONFIG_BT_TX_BUFF_SIZE  (6 * 1024)

#endif
#define BT_NORMAL_HZ	            CONFIG_BT_NORMAL_HZ
//*********************************************************************************//
//                                 时钟切换配置                                    //
//*********************************************************************************//

#define BT_NORMAL_HZ	            CONFIG_BT_NORMAL_HZ
#define BT_CONNECT_HZ               CONFIG_BT_CONNECT_HZ

#define BT_A2DP_HZ	        	    CONFIG_BT_A2DP_HZ
#define BT_TWS_DEC_HZ	        	CONFIG_TWS_DEC_HZ

//#define MUSIC_DEC_CLOCK			    CONFIG_MUSIC_DEC_CLOCK
//#define MUSIC_IDLE_CLOCK		    CONFIG_MUSIC_IDLE_CLOCK

#define BT_CALL_HZ		            CONFIG_BT_CALL_HZ
#define BT_CALL_ADVANCE_HZ          CONFIG_BT_CALL_ADVANCE_HZ
#define BT_CALL_16k_HZ	            CONFIG_BT_CALL_16k_HZ
#define BT_CALL_16k_ADVANCE_HZ      CONFIG_BT_CALL_16k_ADVANCE_HZ

//*********************************************************************************//
//                                 升级配置                                        //
//*********************************************************************************//
#if (defined(CONFIG_CPU_BR30))
//升级LED显示使能
//#define UPDATE_LED_REMIND
//升级提示音使能
//#define UPDATE_VOICE_REMIND
#endif

#if (defined(CONFIG_CPU_BR23) || defined(CONFIG_CPU_BR25))
//升级IO保持使能
//#define DEV_UPDATE_SUPPORT_JUMP           //目前只有br23\br25支持
#endif
#endif