#ifndef APP_CONFIG_H #define APP_CONFIG_H /* * 系统打印总开关 */ #ifdef CONFIG_RELEASE_ENABLE #define LIB_DEBUG 0 #else #define LIB_DEBUG 1 #endif #define CONFIG_DEBUG_LIB(x) (x & LIB_DEBUG) #define CONFIG_DEBUG_ENABLE #define TCFG_MEDIA_LIB_USE_MALLOC 1 //apps example 选择,只能选1个,要配置对应的board_config.h #define CONFIG_APP_SPP_LE 1 //SPP + LE or LE's client #define CONFIG_APP_FTMS 0 //FTMS #define CONFIG_APP_FINDMY 0 //FINDMY #define CONFIG_APP_MULTI 0 //蓝牙LE多连 + spp #define CONFIG_APP_DONGLE 0 //usb + 蓝牙(ble 主机),PC hid设备 #define CONFIG_APP_CENTRAL 0 //ble client,中心设备 #define CONFIG_APP_LL_SYNC 0 //腾讯连连 #define CONFIG_APP_BEACON 0 //蓝牙BLE ibeacon #define CONFIG_APP_NONCONN_24G 0 //2.4G 非连接收发 #define CONFIG_APP_TUYA 0 //涂鸦协议 #define CONFIG_APP_AT_COM 0 //AT com HEX格式命令 #define CONFIG_APP_AT_CHAR_COM 0 //AT com 字符串格式命令 #define CONFIG_APP_IDLE 0 //空闲任务 #define CONFIG_APP_CONN_24G 0 //基于BLE的2.4g,板级只需要开BLE #define CONFIG_APP_HILINK 0 //华为协议 #define CONFIG_APP_ELECTROCAR 0 //电车项目,注意将板级处ADKEY以及别的IO占用失能, 关闭低功耗:TCFG_LOWPOWER_LOWPOWER_SEL设置为0 // #define LL_SYNC_EN CONFIG_APP_LL_SYNC // // #define TUYA_DEMO_EN CONFIG_APP_TUYA //edr sniff config #define SNIFF_MODE_RESET_ANCHOR 0 //V5.0 扩展广播/扫描使能 #define CONFIG_BT_EXT_ADV_MODE 0 #define CONFIG_SET_1M_PHY 1 //for iot #define CONFIG_SET_2M_PHY 2 #define CONFIG_SET_CODED_S2_PHY 3 #define CONFIG_SET_CODED_S8_PHY 4 #define CONFIG_BLE_PHY_SET CONFIG_SET_1M_PHY //default //BLE做主机，使能是否支持搜索连接JL的测试盒 #define SUPPORT_TEST_BOX_BLE_MASTER_TEST_EN 0 #if CONFIG_APP_SPP_LE //配置双模同名字，同地址 #define DOUBLE_BT_SAME_NAME 0 //同名字 #define DOUBLE_BT_SAME_MAC 0 //同地址 #define CONFIG_APP_SPP_LE_TO_IDLE 0 //SPP_AND_LE To IDLE Use #define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长 //蓝牙BLE配置 #define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块 #define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密 #define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (支持使能1,search profile) #define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数 #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数 //BLE 从机扩展搜索对方服务功能,需要打开GATT CLIENT #if CONFIG_BT_GATT_CLIENT_NUM #define TRANS_CLIENT_SEARCH_PROFILE_ENABLE 1/*配置模块搜索指定的服务*/ #if !TRANS_CLIENT_SEARCH_PROFILE_ENABLE && CONFIG_BT_SM_SUPPORT_ENABLE /*定制搜索ANCS&AMS服务*/ #define TRANS_ANCS_EN 1/*配置搜索主机的ANCS 服务,要开配对绑定*/ #define TRANS_AMS_EN 0/*配置搜索主机的ANCS 服务,要开配对绑定*/ #endif #endif//#if CONFIG_BT_GATT_CLIENT_NUM #elif CONFIG_APP_DONGLE /*默认做搜索设备匹配名字再发起连接 inquery + page*/ #define EDR_EMITTER_EN 0 //蓝牙(edr主机) #if EDR_EMITTER_EN /*不做搜索匹配 + 连接，只开放可连接，等待对方连接*/ #define EDR_EMITTER_PAGESCAN_ONLY 0 /**/ #endif #define CONFIG_BT_GATT_COMMON_ENABLE 1 #define CONFIG_BT_SM_SUPPORT_ENABLE 1 //配置是否支持加密 #define CONFIG_BT_GATT_CLIENT_NUM 1 //设置主机个数1~2,(dongle可连接蓝牙BLE设备的个数,=2时会多注册1个usb设备) #define CONFIG_BT_COMPOSITE_EQUIPMENT 0 #define CONFIG_BT_GATT_SERVER_NUM 0 // #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) // #define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长 #elif CONFIG_APP_CENTRAL #define CONFIG_BT_GATT_COMMON_ENABLE 1 #define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密 #define CONFIG_BT_GATT_CLIENT_NUM 1 // #define CONFIG_BT_GATT_SERVER_NUM 0 //(使能1,在主机链路上,提供服务service给对方搜索，以及操作,不创建新的连接) #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) // #define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长 #elif CONFIG_APP_MULTI #define CONFIG_BT_GATT_COMMON_ENABLE 1 #define CONFIG_BT_SM_SUPPORT_ENABLE 0 #define CONFIG_BT_GATT_CLIENT_NUM 1 //range(0~7) #define CONFIG_BT_GATT_SERVER_NUM 0 //range(0~1) #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //range(0~8) #define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长 #elif CONFIG_APP_AT_COM //选择AT: 主机从机二选一 #define TRANS_AT_COM 1 //串口控制对接蓝牙双模透传 #define TRANS_AT_CLIENT 0 //串口控制对接蓝牙BLE主机透传 #define CONFIG_BT_GATT_COMMON_ENABLE 0//(apps not support,应用不支持使能) #define CONFIG_BT_SM_SUPPORT_ENABLE 0//(apps not support,应用不支持使能) #define CONFIG_BT_GATT_CLIENT_NUM 1//max is 1 #define CONFIG_BT_GATT_SERVER_NUM 1//max is 1 #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) #elif CONFIG_APP_AT_CHAR_COM #define CONFIG_BT_GATT_COMMON_ENABLE 0//(apps not support,应用不支持使能) #define CONFIG_BT_SM_SUPPORT_ENABLE 0//(apps not support,应用不支持使能) #define CONFIG_BT_GATT_CLIENT_NUM 1//max is 1 #define CONFIG_BT_GATT_SERVER_NUM 1//max is 1 #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) #elif CONFIG_APP_TUYA //配置双模同名字，同地址 #define DOUBLE_BT_SAME_NAME 0 //同名字 //蓝牙配置 #define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块 #define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密 #define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数(app not support,应用不支持使能) #define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数,max is 1 #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数 #elif CONFIG_APP_LL_SYNC //配置双模同名字，同地址 #define DOUBLE_BT_SAME_NAME 0 //同名字 //蓝牙配置 #define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块 #define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密 #define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数(app not support,应用不支持使能) #define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数,max is 1 #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数 #elif CONFIG_APP_CONN_24G #define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块 #define CONFIG_BT_SM_SUPPORT_ENABLE 0 //(apps not support,应用不支持使能) #define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client使能,max is 1 #define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server使能,max is 1 //2.4G模式: 0---ble, 非0---2.4G配对码; !!!主从欲连接,需保持配对码一致 //!!!初始化之后任意非连接时刻修改配对码API:rf_set_conn_24g_coded #define CFG_RF_24G_CODE_ID_SCAN (0x5555AAAA) //<=24bits 主机扫描2.4G配对码 #define CFG_RF_24G_CODE_ID_ADV (0x5555AAAA) //<=24bits 从机广播2.4G配对码 #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) #define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长 #undef CONFIG_BLE_PHY_SET #define CONFIG_BLE_PHY_SET 4 //PHY SEL 1--1M, 2--2M, 3--CODED_S2, 4--CODED_S8 #if CONFIG_BLE_HIGH_SPEED #undef CONFIG_BLE_PHY_SET #define CONFIG_BLE_PHY_SET 2 //SET 2M_PHY for protect #endif #elif CONFIG_APP_HILINK //配置双模同名字，同地址 #define DOUBLE_BT_SAME_NAME 1 //同名字 #define DOUBLE_BT_SAME_MAC 0 //同地址 //蓝牙配置 #define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块 #define CONFIG_BT_SM_SUPPORT_ENABLE 1 //配置是否支持加密 #define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数(app not support,应用不支持使能) #define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数,max is 1 #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) #elif CONFIG_APP_FINDMY #define CONFIG_BLE_HIGH_SPEED 1 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长 //蓝牙BLE配置 #define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块 #define CONFIG_BT_SM_SUPPORT_ENABLE 1 //配置是否支持加密 #define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (app not support,应用不支持使能) #define CONFIG_BT_GATT_SERVER_NUM 2 //配置从机server个数 #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数 //debug for sensor's data to uart #define FMY_DEBUG_SENSOR_TO_UART_ENBALE 0 //debug for test sensor is moving #define FMY_DEBUG_TEST_MOTION_DETETION 0 //认证测试模式 #define FMY_FMCA_TEST_MODE 0 //支持pair状态,按键进入或退出测试盒连接模式 #define FMY_SUPPORT_TEST_BOX_MODE 0 #elif CONFIG_APP_FTMS //配置双模同名字，同地址 #define DOUBLE_BT_SAME_NAME 0 //同名字 #define DOUBLE_BT_SAME_MAC 0 //同地址 #define CONFIG_APP_SPP_LE_TO_IDLE 0 //SPP_AND_LE To IDLE Use #define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长 //蓝牙BLE配置 #define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块 #define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密 #define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (支持使能1,search profile) #define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数 #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数 #else #define CONFIG_BT_GATT_COMMON_ENABLE 0 #define CONFIG_BT_SM_SUPPORT_ENABLE 0 #define CONFIG_BT_GATT_CLIENT_NUM 0 #define CONFIG_BT_GATT_SERVER_NUM 0 #define CONFIG_BT_GATT_CONNECTION_NUM 0 #endif #if CONFIG_APP_ELECTROCAR //暂时只有bd19(AC632N)支持433/nrf/一键通 // 433 配置 // #define TCFG_433_ENABLE DISABLE_THIS_MOUDLE #define TCFG_433_PORT IO_PORTB_00 #define TCFG_433_IO_TEST ENABLE_THIS_MOUDLE//通过IO捕获433输入数据 // nrf 配置 // #define TCFG_NFC_ENABLE DISABLE_THIS_MOUDLE #define TCFG_NFC_PORT IO_PORTB_01 #define TCFG_NFC_IO_TEST ENABLE_THIS_MOUDLE//通过IO捕获433输入数据 // 一键通 配置 // #define TCFG_ONE_PARSE_ENABLE DISABLE_THIS_MOUDLE #define TCFG_ONE_PARSE_PORT IO_PORTB_03 #define TCFG_ONE_PARSE_IO_TEST ENABLE_THIS_MOUDLE//通过IO捕获433输入数据 //蓝牙BLE配置 #define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块 #define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密 #define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (app not support,应用不支持使能) #define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数 #define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数 #endif #if CONFIG_BT_GATT_CONNECTION_NUM > 8 #error "SUPPORT MAX IS 8 !!!" #endif #include "board_config.h" #include "usb_common_def.h" #include "btcontroller_mode.h" #include "user_cfg_id.h" #define APP_PRIVATE_PROFILE_CFG #if CONFIG_BT_EXT_ADV_MODE #define APP_TO_ALLOW_EXT_ADV //unsupport sleep #undef TCFG_LOWPOWER_LOWPOWER_SEL #define TCFG_LOWPOWER_LOWPOWER_SEL 0 #endif #if (CONFIG_BT_MODE == BT_NORMAL) //enable dut mode,need disable sleep(TCFG_LOWPOWER_LOWPOWER_SEL = 0) #define TCFG_NORMAL_SET_DUT_MODE 0 #if TCFG_NORMAL_SET_DUT_MODE //unsupport sleep #undef TCFG_LOWPOWER_LOWPOWER_SEL #define TCFG_LOWPOWER_LOWPOWER_SEL 0 #if TCFG_USER_EDR_ENABLE && TCFG_USER_BLE_ENABLE //不支持同时打开 #error "dut need disable one bt!!!" #endif #endif //#if TCFG_NORMAL_SET_DUT_MODE #else #undef TCFG_BD_NUM #define TCFG_BD_NUM 1 #undef TCFG_USER_TWS_ENABLE #define TCFG_USER_TWS_ENABLE 0 //tws功能使能 #undef TCFG_USER_BLE_ENABLE #define TCFG_USER_BLE_ENABLE 1 //BLE功能使能 #undef TCFG_AUTO_SHUT_DOWN_TIME #define TCFG_AUTO_SHUT_DOWN_TIME 0 #undef TCFG_SYS_LVD_EN #define TCFG_SYS_LVD_EN 0 #undef TCFG_LOWPOWER_LOWPOWER_SEL #define TCFG_LOWPOWER_LOWPOWER_SEL 0 #undef TCFG_AUDIO_DAC_LDO_VOLT #define TCFG_AUDIO_DAC_LDO_VOLT DACVDD_LDO_2_65V #undef TCFG_LOWPOWER_POWER_SEL #define TCFG_LOWPOWER_POWER_SEL PWR_LDO15 #undef TCFG_PWMLED_ENABLE #define TCFG_PWMLED_ENABLE DISABLE_THIS_MOUDLE #undef TCFG_ADKEY_ENABLE #define TCFG_ADKEY_ENABLE DISABLE_THIS_MOUDLE #undef TCFG_IOKEY_ENABLE #define TCFG_IOKEY_ENABLE DISABLE_THIS_MOUDLE #undef TCFG_TEST_BOX_ENABLE #define TCFG_TEST_BOX_ENABLE 0 #undef TCFG_AUTO_SHUT_DOWN_TIME #define TCFG_AUTO_SHUT_DOWN_TIME 0 #undef TCFG_POWER_ON_NEED_KEY #define TCFG_POWER_ON_NEED_KEY 0 #undef TCFG_UART0_ENABLE #define TCFG_UART0_ENABLE DISABLE_THIS_MOUDLE #endif #define BT_FOR_APP_EN 0 //需要app(BLE)升级要开一下宏定义 #if CONFIG_APP_OTA_ENABLE #define RCSP_BTMATE_EN 1 #define RCSP_UPDATE_EN 1 #define UPDATE_MD5_ENABLE 0 #else #define RCSP_BTMATE_EN 0 #define RCSP_UPDATE_EN 0 #define UPDATE_MD5_ENABLE 0 #endif #ifdef CONFIG_SDFILE_ENABLE #define SDFILE_DEV "sdfile" #define SDFILE_MOUNT_PATH "mnt/sdfile" #if (USE_SDFILE_NEW) #define SDFILE_APP_ROOT_PATH SDFILE_MOUNT_PATH"/app/" //app分区 #define SDFILE_RES_ROOT_PATH SDFILE_MOUNT_PATH"/res/" //资源文件分区 #else #define SDFILE_RES_ROOT_PATH SDFILE_MOUNT_PATH"/C/" #endif #endif #if TCFG_USER_EDR_ENABLE #if RCSP_BTMATE_EN #define CONFIG_BT_RX_BUFF_SIZE (3 * 512) #define CONFIG_BT_TX_BUFF_SIZE (3 * 512) #else #define CONFIG_BT_RX_BUFF_SIZE (5 * 512) #define CONFIG_BT_TX_BUFF_SIZE (5 * 512) #endif #else #define CONFIG_BT_RX_BUFF_SIZE (0) #define CONFIG_BT_TX_BUFF_SIZE (0) #endif #if (CONFIG_BT_MODE != BT_NORMAL) ////bqb 如果测试3M tx buf 最好加大一点 #undef CONFIG_BT_TX_BUFF_SIZE #define CONFIG_BT_TX_BUFF_SIZE (6 * 1024) #endif #define BT_NORMAL_HZ CONFIG_BT_NORMAL_HZ //*********************************************************************************// // 时钟切换配置 // //*********************************************************************************// #define BT_NORMAL_HZ CONFIG_BT_NORMAL_HZ #define BT_CONNECT_HZ CONFIG_BT_CONNECT_HZ #define BT_A2DP_HZ CONFIG_BT_A2DP_HZ #define BT_TWS_DEC_HZ CONFIG_TWS_DEC_HZ //#define MUSIC_DEC_CLOCK CONFIG_MUSIC_DEC_CLOCK //#define MUSIC_IDLE_CLOCK CONFIG_MUSIC_IDLE_CLOCK #define BT_CALL_HZ CONFIG_BT_CALL_HZ #define BT_CALL_ADVANCE_HZ CONFIG_BT_CALL_ADVANCE_HZ #define BT_CALL_16k_HZ CONFIG_BT_CALL_16k_HZ #define BT_CALL_16k_ADVANCE_HZ CONFIG_BT_CALL_16k_ADVANCE_HZ //*********************************************************************************// // 升级配置 // //*********************************************************************************// #if (defined(CONFIG_CPU_BR30)) //升级LED显示使能 //#define UPDATE_LED_REMIND //升级提示音使能 //#define UPDATE_VOICE_REMIND #endif #if (defined(CONFIG_CPU_BR23) || defined(CONFIG_CPU_BR25)) //升级IO保持使能 //#define DEV_UPDATE_SUPPORT_JUMP //目前只有br23\br25支持 #endif #if (defined(CONFIG_CPU_BR23) || defined(CONFIG_CPU_BR25) || defined(CONFIG_CPU_BD29) || defined(CONFIG_CPU_BD19) || defined(CONFIG_CPU_BR30) || defined(CONFIG_CPU_BR34)) #define USER_UART_UPDATE_ENABLE 0//用于客户开发上位机或者多MCU串口升级方案,请确保串口通信前已经退出powerdown,需要在对应的board添加初始化和唤醒口配置参考board_ac632n_demo.c #define UART_UPDATE_SLAVE 0 #define UART_UPDATE_MASTER 1 //配置串口升级IO #define UART_UPDATE_RX_PORT IO_PORTA_02 #define UART_UPDATE_TX_PORT IO_PORTA_03 //配置串口升级的角色 #define UART_UPDATE_ROLE UART_UPDATE_SLAVE #if USER_UART_UPDATE_ENABLE #undef TCFG_CHARGESTORE_ENABLE #undef TCFG_TEST_BOX_ENABLE #define TCFG_CHARGESTORE_ENABLE DISABLE_THIS_MOUDLE //用户串口升级也使用了UART1 #endif #endif //USER_UART_UPDATE_ENABLE #define FLOW_CONTROL 0 //AT 字符串口流控, 目前只有br30做了测试 #endif