huangjin/AC63_BT_SDK
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
AC63_BT_SDK/apps/spp_and_le/include/app_config.h

441 lines
18 KiB
C
Raw Normal View History

原始文件
2025-02-18 15:40:42 +08:00
#ifndef APP_CONFIG_H
#define APP_CONFIG_H
/*
* 系统打印总开关
*/
#ifdef CONFIG_RELEASE_ENABLE
#define LIB_DEBUG 0
#else
#define LIB_DEBUG 1
#endif
#define CONFIG_DEBUG_LIB(x) (x & LIB_DEBUG)
#define CONFIG_DEBUG_ENABLE
#define TCFG_MEDIA_LIB_USE_MALLOC 1
//apps example 选择,只能选1个,要配置对应的board_config.h
#define CONFIG_APP_SPP_LE 1 //SPP + LE or LE's client
#define CONFIG_APP_FTMS 0 //FTMS
#define CONFIG_APP_FINDMY 0 //FINDMY
#define CONFIG_APP_MULTI 0 //蓝牙LE多连 + spp
#define CONFIG_APP_DONGLE 0 //usb + 蓝牙(ble 主机),PC hid设备
#define CONFIG_APP_CENTRAL 0 //ble client,中心设备
#define CONFIG_APP_LL_SYNC 0 //腾讯连连
#define CONFIG_APP_BEACON 0 //蓝牙BLE ibeacon
#define CONFIG_APP_NONCONN_24G 0 //2.4G 非连接收发
#define CONFIG_APP_TUYA 0 //涂鸦协议
#define CONFIG_APP_AT_COM 0 //AT com HEX格式命令
#define CONFIG_APP_AT_CHAR_COM 0 //AT com 字符串格式命令
#define CONFIG_APP_IDLE 0 //空闲任务
#define CONFIG_APP_CONN_24G 0 //基于BLE的2.4g,板级只需要开BLE
#define CONFIG_APP_HILINK 0 //华为协议
#define CONFIG_APP_ELECTROCAR 0 //电车项目,注意将板级处ADKEY以及别的IO占用失能, 关闭低功耗:TCFG_LOWPOWER_LOWPOWER_SEL设置为0
// #define LL_SYNC_EN CONFIG_APP_LL_SYNC //
// #define TUYA_DEMO_EN CONFIG_APP_TUYA
//edr sniff config
#define SNIFF_MODE_RESET_ANCHOR 0
//V5.0 扩展广播/扫描使能
#define CONFIG_BT_EXT_ADV_MODE 0
#define CONFIG_SET_1M_PHY 1 //for iot
#define CONFIG_SET_2M_PHY 2
#define CONFIG_SET_CODED_S2_PHY 3
#define CONFIG_SET_CODED_S8_PHY 4
#define CONFIG_BLE_PHY_SET CONFIG_SET_1M_PHY //default
//BLE做主机，使能是否支持搜索连接JL的测试盒
#define SUPPORT_TEST_BOX_BLE_MASTER_TEST_EN 0
#if CONFIG_APP_SPP_LE
//配置双模同名字，同地址
#define DOUBLE_BT_SAME_NAME 0 //同名字
#define DOUBLE_BT_SAME_MAC 0 //同地址
#define CONFIG_APP_SPP_LE_TO_IDLE 0 //SPP_AND_LE To IDLE Use
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
//蓝牙BLE配置
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (支持使能1,search profile)
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
//BLE 从机扩展搜索对方服务功能,需要打开GATT CLIENT
#if CONFIG_BT_GATT_CLIENT_NUM
#define TRANS_CLIENT_SEARCH_PROFILE_ENABLE 1/*配置模块搜索指定的服务*/
#if !TRANS_CLIENT_SEARCH_PROFILE_ENABLE && CONFIG_BT_SM_SUPPORT_ENABLE /*定制搜索ANCS&AMS服务*/
#define TRANS_ANCS_EN 1/*配置搜索主机的ANCS 服务,要开配对绑定*/
#define TRANS_AMS_EN 0/*配置搜索主机的ANCS 服务,要开配对绑定*/
#endif
#endif//#if CONFIG_BT_GATT_CLIENT_NUM
#elif CONFIG_APP_DONGLE
/*默认做搜索设备匹配名字再发起连接 inquery + page*/
#define EDR_EMITTER_EN 0 //蓝牙(edr主机)
#if EDR_EMITTER_EN
/*不做搜索匹配 + 连接，只开放可连接，等待对方连接*/
#define EDR_EMITTER_PAGESCAN_ONLY 0 /**/
#endif
#define CONFIG_BT_GATT_COMMON_ENABLE 1
#define CONFIG_BT_SM_SUPPORT_ENABLE 1 //配置是否支持加密
#define CONFIG_BT_GATT_CLIENT_NUM 1 //设置主机个数1~2,(dongle可连接蓝牙BLE设备的个数,=2时会多注册1个usb设备)
#define CONFIG_BT_COMPOSITE_EQUIPMENT 0
#define CONFIG_BT_GATT_SERVER_NUM 0 //
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
#elif CONFIG_APP_CENTRAL
#define CONFIG_BT_GATT_COMMON_ENABLE 1
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
#define CONFIG_BT_GATT_CLIENT_NUM 1 //
#define CONFIG_BT_GATT_SERVER_NUM 0 //(使能1,在主机链路上,提供服务service给对方搜索，以及操作,不创建新的连接)
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
#elif CONFIG_APP_MULTI
#define CONFIG_BT_GATT_COMMON_ENABLE 1
#define CONFIG_BT_SM_SUPPORT_ENABLE 0
#define CONFIG_BT_GATT_CLIENT_NUM 1 //range(0~7)
#define CONFIG_BT_GATT_SERVER_NUM 0 //range(0~1)
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //range(0~8)
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
#elif CONFIG_APP_AT_COM
//选择AT: 主机从机二选一
#define TRANS_AT_COM 1 //串口控制对接蓝牙双模透传
#define TRANS_AT_CLIENT 0 //串口控制对接蓝牙BLE主机透传
#define CONFIG_BT_GATT_COMMON_ENABLE 0//(apps not support,应用不支持使能)
#define CONFIG_BT_SM_SUPPORT_ENABLE 0//(apps not support,应用不支持使能)
#define CONFIG_BT_GATT_CLIENT_NUM 1//max is 1
#define CONFIG_BT_GATT_SERVER_NUM 1//max is 1
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM)
#elif CONFIG_APP_AT_CHAR_COM
#define CONFIG_BT_GATT_COMMON_ENABLE 0//(apps not support,应用不支持使能)
#define CONFIG_BT_SM_SUPPORT_ENABLE 0//(apps not support,应用不支持使能)
#define CONFIG_BT_GATT_CLIENT_NUM 1//max is 1
#define CONFIG_BT_GATT_SERVER_NUM 1//max is 1
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM)
#elif CONFIG_APP_TUYA
//配置双模同名字，同地址
#define DOUBLE_BT_SAME_NAME 0 //同名字
//蓝牙配置
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数(app not support,应用不支持使能)
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数,max is 1
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
#elif CONFIG_APP_LL_SYNC
//配置双模同名字，同地址
#define DOUBLE_BT_SAME_NAME 0 //同名字
//蓝牙配置
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数(app not support,应用不支持使能)
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数,max is 1
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
#elif CONFIG_APP_CONN_24G
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //(apps not support,应用不支持使能)
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client使能,max is 1
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server使能,max is 1
//2.4G模式: 0---ble, 非0---2.4G配对码; !!!主从欲连接,需保持配对码一致
//!!!初始化之后任意非连接时刻修改配对码API:rf_set_conn_24g_coded
#define CFG_RF_24G_CODE_ID_SCAN (0x5555AAAA) //<=24bits 主机扫描2.4G配对码
#define CFG_RF_24G_CODE_ID_ADV (0x5555AAAA) //<=24bits 从机广播2.4G配对码
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM)
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
#undef CONFIG_BLE_PHY_SET
#define CONFIG_BLE_PHY_SET 4 //PHY SEL 1--1M, 2--2M, 3--CODED_S2, 4--CODED_S8
#if CONFIG_BLE_HIGH_SPEED
#undef CONFIG_BLE_PHY_SET
#define CONFIG_BLE_PHY_SET 2 //SET 2M_PHY for protect
#endif
#elif CONFIG_APP_HILINK
//配置双模同名字，同地址
#define DOUBLE_BT_SAME_NAME 1 //同名字
#define DOUBLE_BT_SAME_MAC 0 //同地址
//蓝牙配置
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
#define CONFIG_BT_SM_SUPPORT_ENABLE 1 //配置是否支持加密
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数(app not support,应用不支持使能)
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数,max is 1
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM)
#elif CONFIG_APP_FINDMY
#define CONFIG_BLE_HIGH_SPEED 1 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
//蓝牙BLE配置
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
#define CONFIG_BT_SM_SUPPORT_ENABLE 1 //配置是否支持加密
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (app not support,应用不支持使能)
#define CONFIG_BT_GATT_SERVER_NUM 2 //配置从机server个数
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
//debug for sensor's data to uart
#define FMY_DEBUG_SENSOR_TO_UART_ENBALE 0
//debug for test sensor is moving
#define FMY_DEBUG_TEST_MOTION_DETETION 0
//认证测试模式
#define FMY_FMCA_TEST_MODE 0
//支持pair状态,按键进入或退出测试盒连接模式
#define FMY_SUPPORT_TEST_BOX_MODE 0
#elif CONFIG_APP_FTMS
//配置双模同名字，同地址
#define DOUBLE_BT_SAME_NAME 0 //同名字
#define DOUBLE_BT_SAME_MAC 0 //同地址
#define CONFIG_APP_SPP_LE_TO_IDLE 0 //SPP_AND_LE To IDLE Use
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
//蓝牙BLE配置
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (支持使能1,search profile)
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
#else
#define CONFIG_BT_GATT_COMMON_ENABLE 0
#define CONFIG_BT_SM_SUPPORT_ENABLE 0
#define CONFIG_BT_GATT_CLIENT_NUM 0
#define CONFIG_BT_GATT_SERVER_NUM 0
#define CONFIG_BT_GATT_CONNECTION_NUM 0
#endif
#if CONFIG_APP_ELECTROCAR
//暂时只有bd19(AC632N)支持433/nrf/一键通
// 433 配置 //
#define TCFG_433_ENABLE DISABLE_THIS_MOUDLE
#define TCFG_433_PORT IO_PORTB_00
#define TCFG_433_IO_TEST ENABLE_THIS_MOUDLE//通过IO捕获433输入数据
// nrf 配置 //
#define TCFG_NFC_ENABLE DISABLE_THIS_MOUDLE
#define TCFG_NFC_PORT IO_PORTB_01
#define TCFG_NFC_IO_TEST ENABLE_THIS_MOUDLE//通过IO捕获433输入数据
// 一键通 配置 //
#define TCFG_ONE_PARSE_ENABLE DISABLE_THIS_MOUDLE
#define TCFG_ONE_PARSE_PORT IO_PORTB_03
#define TCFG_ONE_PARSE_IO_TEST ENABLE_THIS_MOUDLE//通过IO捕获433输入数据
//蓝牙BLE配置
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (app not support,应用不支持使能)
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
#endif
#if CONFIG_BT_GATT_CONNECTION_NUM > 8
#error "SUPPORT MAX IS 8 !!!"
#endif
#include "board_config.h"
#include "usb_common_def.h"
#include "btcontroller_mode.h"
#include "user_cfg_id.h"
#define APP_PRIVATE_PROFILE_CFG
#if CONFIG_BT_EXT_ADV_MODE
#define APP_TO_ALLOW_EXT_ADV
//unsupport sleep
#undef TCFG_LOWPOWER_LOWPOWER_SEL
#define TCFG_LOWPOWER_LOWPOWER_SEL 0
#endif
#if (CONFIG_BT_MODE == BT_NORMAL)
//enable dut mode,need disable sleep(TCFG_LOWPOWER_LOWPOWER_SEL = 0)
#define TCFG_NORMAL_SET_DUT_MODE 0
#if TCFG_NORMAL_SET_DUT_MODE
//unsupport sleep
#undef TCFG_LOWPOWER_LOWPOWER_SEL
#define TCFG_LOWPOWER_LOWPOWER_SEL 0
#if TCFG_USER_EDR_ENABLE && TCFG_USER_BLE_ENABLE
//不支持同时打开
#error "dut need disable one bt!!!"
#endif
#endif //#if TCFG_NORMAL_SET_DUT_MODE
#else
#undef TCFG_BD_NUM
#define TCFG_BD_NUM 1
#undef TCFG_USER_TWS_ENABLE
#define TCFG_USER_TWS_ENABLE 0 //tws功能使能
#undef TCFG_USER_BLE_ENABLE
#define TCFG_USER_BLE_ENABLE 1 //BLE功能使能
#undef TCFG_AUTO_SHUT_DOWN_TIME
#define TCFG_AUTO_SHUT_DOWN_TIME 0
#undef TCFG_SYS_LVD_EN
#define TCFG_SYS_LVD_EN 0
#undef TCFG_LOWPOWER_LOWPOWER_SEL
#define TCFG_LOWPOWER_LOWPOWER_SEL 0
#undef TCFG_AUDIO_DAC_LDO_VOLT
#define TCFG_AUDIO_DAC_LDO_VOLT DACVDD_LDO_2_65V
#undef TCFG_LOWPOWER_POWER_SEL
#define TCFG_LOWPOWER_POWER_SEL PWR_LDO15
#undef TCFG_PWMLED_ENABLE
#define TCFG_PWMLED_ENABLE DISABLE_THIS_MOUDLE
#undef TCFG_ADKEY_ENABLE
#define TCFG_ADKEY_ENABLE DISABLE_THIS_MOUDLE
#undef TCFG_IOKEY_ENABLE
#define TCFG_IOKEY_ENABLE DISABLE_THIS_MOUDLE
#undef TCFG_TEST_BOX_ENABLE
#define TCFG_TEST_BOX_ENABLE 0
#undef TCFG_AUTO_SHUT_DOWN_TIME
#define TCFG_AUTO_SHUT_DOWN_TIME 0
#undef TCFG_POWER_ON_NEED_KEY
#define TCFG_POWER_ON_NEED_KEY 0
#undef TCFG_UART0_ENABLE
#define TCFG_UART0_ENABLE DISABLE_THIS_MOUDLE
#endif
#define BT_FOR_APP_EN 0
//需要app(BLE)升级要开一下宏定义
#if CONFIG_APP_OTA_ENABLE
#define RCSP_BTMATE_EN 1
#define RCSP_UPDATE_EN 1
#define UPDATE_MD5_ENABLE 0
#else
#define RCSP_BTMATE_EN 0
#define RCSP_UPDATE_EN 0
#define UPDATE_MD5_ENABLE 0
#endif
#ifdef CONFIG_SDFILE_ENABLE
#define SDFILE_DEV "sdfile"
#define SDFILE_MOUNT_PATH "mnt/sdfile"
#if (USE_SDFILE_NEW)
#define SDFILE_APP_ROOT_PATH SDFILE_MOUNT_PATH"/app/" //app分区
#define SDFILE_RES_ROOT_PATH SDFILE_MOUNT_PATH"/res/" //资源文件分区
#else
#define SDFILE_RES_ROOT_PATH SDFILE_MOUNT_PATH"/C/"
#endif
#endif
#if TCFG_USER_EDR_ENABLE
#if RCSP_BTMATE_EN
#define CONFIG_BT_RX_BUFF_SIZE (3 * 512)
#define CONFIG_BT_TX_BUFF_SIZE (3 * 512)
#else
#define CONFIG_BT_RX_BUFF_SIZE (5 * 512)
#define CONFIG_BT_TX_BUFF_SIZE (5 * 512)
#endif
#else
#define CONFIG_BT_RX_BUFF_SIZE (0)
#define CONFIG_BT_TX_BUFF_SIZE (0)
#endif
#if (CONFIG_BT_MODE != BT_NORMAL)
////bqb 如果测试3M tx buf 最好加大一点
#undef CONFIG_BT_TX_BUFF_SIZE
#define CONFIG_BT_TX_BUFF_SIZE (6 * 1024)
#endif
#define BT_NORMAL_HZ CONFIG_BT_NORMAL_HZ
//*********************************************************************************//
// 时钟切换配置 //
//*********************************************************************************//
#define BT_NORMAL_HZ CONFIG_BT_NORMAL_HZ
#define BT_CONNECT_HZ CONFIG_BT_CONNECT_HZ
#define BT_A2DP_HZ CONFIG_BT_A2DP_HZ
#define BT_TWS_DEC_HZ CONFIG_TWS_DEC_HZ
//#define MUSIC_DEC_CLOCK CONFIG_MUSIC_DEC_CLOCK
//#define MUSIC_IDLE_CLOCK CONFIG_MUSIC_IDLE_CLOCK
#define BT_CALL_HZ CONFIG_BT_CALL_HZ
#define BT_CALL_ADVANCE_HZ CONFIG_BT_CALL_ADVANCE_HZ
#define BT_CALL_16k_HZ CONFIG_BT_CALL_16k_HZ
#define BT_CALL_16k_ADVANCE_HZ CONFIG_BT_CALL_16k_ADVANCE_HZ
//*********************************************************************************//
// 升级配置 //
//*********************************************************************************//
#if (defined(CONFIG_CPU_BR30))
//升级LED显示使能
//#define UPDATE_LED_REMIND
//升级提示音使能
//#define UPDATE_VOICE_REMIND
#endif
#if (defined(CONFIG_CPU_BR23) || defined(CONFIG_CPU_BR25))
//升级IO保持使能
//#define DEV_UPDATE_SUPPORT_JUMP //目前只有br23\br25支持
#endif
#if (defined(CONFIG_CPU_BR23) || defined(CONFIG_CPU_BR25) || defined(CONFIG_CPU_BD29) || defined(CONFIG_CPU_BD19) || defined(CONFIG_CPU_BR30) || defined(CONFIG_CPU_BR34))
#define USER_UART_UPDATE_ENABLE 0//用于客户开发上位机或者多MCU串口升级方案,请确保串口通信前已经退出powerdown,需要在对应的board添加初始化和唤醒口配置参考board_ac632n_demo.c
#define UART_UPDATE_SLAVE 0
#define UART_UPDATE_MASTER 1
//配置串口升级IO
#define UART_UPDATE_RX_PORT IO_PORTA_02
#define UART_UPDATE_TX_PORT IO_PORTA_03
//配置串口升级的角色
#define UART_UPDATE_ROLE UART_UPDATE_SLAVE
#if USER_UART_UPDATE_ENABLE
#undef TCFG_CHARGESTORE_ENABLE
#undef TCFG_TEST_BOX_ENABLE
#define TCFG_CHARGESTORE_ENABLE DISABLE_THIS_MOUDLE //用户串口升级也使用了UART1
#endif
#endif //USER_UART_UPDATE_ENABLE
#define FLOW_CONTROL 0 //AT 字符串口流控, 目前只有br30做了测试
#endif
Reference in New Issue Copy Permalink