441 lines
18 KiB
C
441 lines
18 KiB
C
#ifndef APP_CONFIG_H
|
||
#define APP_CONFIG_H
|
||
|
||
/*
|
||
* 系统打印总开关
|
||
*/
|
||
|
||
|
||
#ifdef CONFIG_RELEASE_ENABLE
|
||
#define LIB_DEBUG 0
|
||
#else
|
||
#define LIB_DEBUG 1
|
||
#endif
|
||
|
||
#define CONFIG_DEBUG_LIB(x) (x & LIB_DEBUG)
|
||
|
||
#define CONFIG_DEBUG_ENABLE
|
||
|
||
#define TCFG_MEDIA_LIB_USE_MALLOC 1
|
||
//apps example 选择,只能选1个,要配置对应的board_config.h
|
||
#define CONFIG_APP_SPP_LE 1 //SPP + LE or LE's client
|
||
#define CONFIG_APP_FTMS 0 //FTMS
|
||
#define CONFIG_APP_FINDMY 0 //FINDMY
|
||
#define CONFIG_APP_MULTI 0 //蓝牙LE多连 + spp
|
||
#define CONFIG_APP_DONGLE 0 //usb + 蓝牙(ble 主机),PC hid设备
|
||
#define CONFIG_APP_CENTRAL 0 //ble client,中心设备
|
||
#define CONFIG_APP_LL_SYNC 0 //腾讯连连
|
||
#define CONFIG_APP_BEACON 0 //蓝牙BLE ibeacon
|
||
#define CONFIG_APP_NONCONN_24G 0 //2.4G 非连接收发
|
||
#define CONFIG_APP_TUYA 0 //涂鸦协议
|
||
#define CONFIG_APP_AT_COM 0 //AT com HEX格式命令
|
||
#define CONFIG_APP_AT_CHAR_COM 0 //AT com 字符串格式命令
|
||
#define CONFIG_APP_IDLE 0 //空闲任务
|
||
#define CONFIG_APP_CONN_24G 0 //基于BLE的2.4g,板级只需要开BLE
|
||
#define CONFIG_APP_HILINK 0 //华为协议
|
||
#define CONFIG_APP_ELECTROCAR 0 //电车项目,注意将板级处ADKEY以及别的IO占用失能, 关闭低功耗:TCFG_LOWPOWER_LOWPOWER_SEL设置为0
|
||
// #define LL_SYNC_EN CONFIG_APP_LL_SYNC //
|
||
// #define TUYA_DEMO_EN CONFIG_APP_TUYA
|
||
|
||
//edr sniff config
|
||
#define SNIFF_MODE_RESET_ANCHOR 0
|
||
//V5.0 扩展广播/扫描使能
|
||
#define CONFIG_BT_EXT_ADV_MODE 0
|
||
|
||
#define CONFIG_SET_1M_PHY 1 //for iot
|
||
#define CONFIG_SET_2M_PHY 2
|
||
#define CONFIG_SET_CODED_S2_PHY 3
|
||
#define CONFIG_SET_CODED_S8_PHY 4
|
||
#define CONFIG_BLE_PHY_SET CONFIG_SET_1M_PHY //default
|
||
|
||
//BLE做主机，使能是否支持搜索连接JL的测试盒
|
||
#define SUPPORT_TEST_BOX_BLE_MASTER_TEST_EN 0
|
||
|
||
#if CONFIG_APP_SPP_LE
|
||
//配置双模同名字，同地址
|
||
#define DOUBLE_BT_SAME_NAME 0 //同名字
|
||
#define DOUBLE_BT_SAME_MAC 0 //同地址
|
||
#define CONFIG_APP_SPP_LE_TO_IDLE 0 //SPP_AND_LE To IDLE Use
|
||
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
|
||
|
||
//蓝牙BLE配置
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (支持使能1,search profile)
|
||
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
|
||
|
||
//BLE 从机扩展搜索对方服务功能,需要打开GATT CLIENT
|
||
#if CONFIG_BT_GATT_CLIENT_NUM
|
||
#define TRANS_CLIENT_SEARCH_PROFILE_ENABLE 1/*配置模块搜索指定的服务*/
|
||
|
||
#if !TRANS_CLIENT_SEARCH_PROFILE_ENABLE && CONFIG_BT_SM_SUPPORT_ENABLE /*定制搜索ANCS&AMS服务*/
|
||
#define TRANS_ANCS_EN 1/*配置搜索主机的ANCS 服务,要开配对绑定*/
|
||
#define TRANS_AMS_EN 0/*配置搜索主机的ANCS 服务,要开配对绑定*/
|
||
#endif
|
||
#endif//#if CONFIG_BT_GATT_CLIENT_NUM
|
||
|
||
#elif CONFIG_APP_DONGLE
|
||
/*默认做搜索设备匹配名字再发起连接 inquery + page*/
|
||
#define EDR_EMITTER_EN 0 //蓝牙(edr主机)
|
||
|
||
#if EDR_EMITTER_EN
|
||
/*不做搜索匹配 + 连接，只开放可连接，等待对方连接*/
|
||
#define EDR_EMITTER_PAGESCAN_ONLY 0 /**/
|
||
#endif
|
||
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 1
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 1 //配置是否支持加密
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 1 //设置主机个数1~2,(dongle可连接蓝牙BLE设备的个数,=2时会多注册1个usb设备)
|
||
#define CONFIG_BT_COMPOSITE_EQUIPMENT 0
|
||
#define CONFIG_BT_GATT_SERVER_NUM 0 //
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //
|
||
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
|
||
|
||
#elif CONFIG_APP_CENTRAL
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 1
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 1 //
|
||
#define CONFIG_BT_GATT_SERVER_NUM 0 //(使能1,在主机链路上,提供服务service给对方搜索，以及操作,不创建新的连接)
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //
|
||
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
|
||
|
||
#elif CONFIG_APP_MULTI
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 1
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 0
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 1 //range(0~7)
|
||
#define CONFIG_BT_GATT_SERVER_NUM 0 //range(0~1)
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //range(0~8)
|
||
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
|
||
|
||
#elif CONFIG_APP_AT_COM
|
||
//选择AT: 主机从机二选一
|
||
#define TRANS_AT_COM 1 //串口控制对接蓝牙双模透传
|
||
#define TRANS_AT_CLIENT 0 //串口控制对接蓝牙BLE主机透传
|
||
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 0//(apps not support,应用不支持使能)
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 0//(apps not support,应用不支持使能)
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 1//max is 1
|
||
#define CONFIG_BT_GATT_SERVER_NUM 1//max is 1
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM)
|
||
|
||
#elif CONFIG_APP_AT_CHAR_COM
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 0//(apps not support,应用不支持使能)
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 0//(apps not support,应用不支持使能)
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 1//max is 1
|
||
#define CONFIG_BT_GATT_SERVER_NUM 1//max is 1
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM)
|
||
|
||
#elif CONFIG_APP_TUYA
|
||
//配置双模同名字，同地址
|
||
#define DOUBLE_BT_SAME_NAME 0 //同名字
|
||
|
||
//蓝牙配置
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数(app not support,应用不支持使能)
|
||
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数,max is 1
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
|
||
|
||
#elif CONFIG_APP_LL_SYNC
|
||
//配置双模同名字，同地址
|
||
#define DOUBLE_BT_SAME_NAME 0 //同名字
|
||
|
||
//蓝牙配置
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数(app not support,应用不支持使能)
|
||
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数,max is 1
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
|
||
|
||
#elif CONFIG_APP_CONN_24G
|
||
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //(apps not support,应用不支持使能)
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client使能,max is 1
|
||
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server使能,max is 1
|
||
//2.4G模式: 0---ble, 非0---2.4G配对码; !!!主从欲连接,需保持配对码一致
|
||
//!!!初始化之后任意非连接时刻修改配对码API:rf_set_conn_24g_coded
|
||
#define CFG_RF_24G_CODE_ID_SCAN (0x5555AAAA) //<=24bits 主机扫描2.4G配对码
|
||
#define CFG_RF_24G_CODE_ID_ADV (0x5555AAAA) //<=24bits 从机广播2.4G配对码
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM)
|
||
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
|
||
#undef CONFIG_BLE_PHY_SET
|
||
#define CONFIG_BLE_PHY_SET 4 //PHY SEL 1--1M, 2--2M, 3--CODED_S2, 4--CODED_S8
|
||
#if CONFIG_BLE_HIGH_SPEED
|
||
#undef CONFIG_BLE_PHY_SET
|
||
#define CONFIG_BLE_PHY_SET 2 //SET 2M_PHY for protect
|
||
#endif
|
||
|
||
#elif CONFIG_APP_HILINK
|
||
//配置双模同名字，同地址
|
||
#define DOUBLE_BT_SAME_NAME 1 //同名字
|
||
#define DOUBLE_BT_SAME_MAC 0 //同地址
|
||
|
||
//蓝牙配置
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 1 //配置是否支持加密
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数(app not support,应用不支持使能)
|
||
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数,max is 1
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM)
|
||
|
||
#elif CONFIG_APP_FINDMY
|
||
#define CONFIG_BLE_HIGH_SPEED 1 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
|
||
|
||
//蓝牙BLE配置
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 1 //配置是否支持加密
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (app not support,应用不支持使能)
|
||
#define CONFIG_BT_GATT_SERVER_NUM 2 //配置从机server个数
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
|
||
|
||
//debug for sensor's data to uart
|
||
#define FMY_DEBUG_SENSOR_TO_UART_ENBALE 0
|
||
//debug for test sensor is moving
|
||
#define FMY_DEBUG_TEST_MOTION_DETETION 0
|
||
//认证测试模式
|
||
#define FMY_FMCA_TEST_MODE 0
|
||
//支持pair状态,按键进入或退出测试盒连接模式
|
||
#define FMY_SUPPORT_TEST_BOX_MODE 0
|
||
|
||
#elif CONFIG_APP_FTMS
|
||
|
||
//配置双模同名字，同地址
|
||
#define DOUBLE_BT_SAME_NAME 0 //同名字
|
||
#define DOUBLE_BT_SAME_MAC 0 //同地址
|
||
#define CONFIG_APP_SPP_LE_TO_IDLE 0 //SPP_AND_LE To IDLE Use
|
||
#define CONFIG_BLE_HIGH_SPEED 0 //BLE提速模式: 使能DLE+2M, payload要匹配pdu的包长
|
||
|
||
//蓝牙BLE配置
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (支持使能1,search profile)
|
||
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
|
||
|
||
#else
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 0
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 0
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 0
|
||
#define CONFIG_BT_GATT_SERVER_NUM 0
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM 0
|
||
|
||
#endif
|
||
|
||
#if CONFIG_APP_ELECTROCAR
|
||
//暂时只有bd19(AC632N)支持433/nrf/一键通
|
||
// 433 配置 //
|
||
#define TCFG_433_ENABLE DISABLE_THIS_MOUDLE
|
||
#define TCFG_433_PORT IO_PORTB_00
|
||
#define TCFG_433_IO_TEST ENABLE_THIS_MOUDLE//通过IO捕获433输入数据
|
||
// nrf 配置 //
|
||
#define TCFG_NFC_ENABLE DISABLE_THIS_MOUDLE
|
||
#define TCFG_NFC_PORT IO_PORTB_01
|
||
#define TCFG_NFC_IO_TEST ENABLE_THIS_MOUDLE//通过IO捕获433输入数据
|
||
// 一键通 配置 //
|
||
#define TCFG_ONE_PARSE_ENABLE DISABLE_THIS_MOUDLE
|
||
#define TCFG_ONE_PARSE_PORT IO_PORTB_03
|
||
#define TCFG_ONE_PARSE_IO_TEST ENABLE_THIS_MOUDLE//通过IO捕获433输入数据
|
||
|
||
//蓝牙BLE配置
|
||
#define CONFIG_BT_GATT_COMMON_ENABLE 1 //配置使用gatt公共模块
|
||
#define CONFIG_BT_SM_SUPPORT_ENABLE 0 //配置是否支持加密
|
||
#define CONFIG_BT_GATT_CLIENT_NUM 0 //配置主机client个数 (app not support,应用不支持使能)
|
||
#define CONFIG_BT_GATT_SERVER_NUM 1 //配置从机server个数
|
||
#define CONFIG_BT_GATT_CONNECTION_NUM (CONFIG_BT_GATT_SERVER_NUM + CONFIG_BT_GATT_CLIENT_NUM) //配置连接个数
|
||
|
||
#endif
|
||
|
||
#if CONFIG_BT_GATT_CONNECTION_NUM > 8
|
||
#error "SUPPORT MAX IS 8 !!!"
|
||
#endif
|
||
|
||
|
||
#include "board_config.h"
|
||
|
||
#include "usb_common_def.h"
|
||
|
||
#include "btcontroller_mode.h"
|
||
|
||
#include "user_cfg_id.h"
|
||
|
||
#define APP_PRIVATE_PROFILE_CFG
|
||
|
||
#if CONFIG_BT_EXT_ADV_MODE
|
||
#define APP_TO_ALLOW_EXT_ADV
|
||
//unsupport sleep
|
||
#undef TCFG_LOWPOWER_LOWPOWER_SEL
|
||
#define TCFG_LOWPOWER_LOWPOWER_SEL 0
|
||
#endif
|
||
|
||
#if (CONFIG_BT_MODE == BT_NORMAL)
|
||
//enable dut mode,need disable sleep(TCFG_LOWPOWER_LOWPOWER_SEL = 0)
|
||
#define TCFG_NORMAL_SET_DUT_MODE 0
|
||
#if TCFG_NORMAL_SET_DUT_MODE
|
||
//unsupport sleep
|
||
#undef TCFG_LOWPOWER_LOWPOWER_SEL
|
||
#define TCFG_LOWPOWER_LOWPOWER_SEL 0
|
||
|
||
#if TCFG_USER_EDR_ENABLE && TCFG_USER_BLE_ENABLE
|
||
//不支持同时打开
|
||
#error "dut need disable one bt!!!"
|
||
#endif
|
||
|
||
#endif //#if TCFG_NORMAL_SET_DUT_MODE
|
||
|
||
#else
|
||
|
||
#undef TCFG_BD_NUM
|
||
#define TCFG_BD_NUM 1
|
||
|
||
#undef TCFG_USER_TWS_ENABLE
|
||
#define TCFG_USER_TWS_ENABLE 0 //tws功能使能
|
||
|
||
#undef TCFG_USER_BLE_ENABLE
|
||
#define TCFG_USER_BLE_ENABLE 1 //BLE功能使能
|
||
|
||
#undef TCFG_AUTO_SHUT_DOWN_TIME
|
||
#define TCFG_AUTO_SHUT_DOWN_TIME 0
|
||
|
||
#undef TCFG_SYS_LVD_EN
|
||
#define TCFG_SYS_LVD_EN 0
|
||
|
||
#undef TCFG_LOWPOWER_LOWPOWER_SEL
|
||
#define TCFG_LOWPOWER_LOWPOWER_SEL 0
|
||
|
||
#undef TCFG_AUDIO_DAC_LDO_VOLT
|
||
#define TCFG_AUDIO_DAC_LDO_VOLT DACVDD_LDO_2_65V
|
||
|
||
#undef TCFG_LOWPOWER_POWER_SEL
|
||
#define TCFG_LOWPOWER_POWER_SEL PWR_LDO15
|
||
|
||
#undef TCFG_PWMLED_ENABLE
|
||
#define TCFG_PWMLED_ENABLE DISABLE_THIS_MOUDLE
|
||
|
||
#undef TCFG_ADKEY_ENABLE
|
||
#define TCFG_ADKEY_ENABLE DISABLE_THIS_MOUDLE
|
||
|
||
#undef TCFG_IOKEY_ENABLE
|
||
#define TCFG_IOKEY_ENABLE DISABLE_THIS_MOUDLE
|
||
|
||
#undef TCFG_TEST_BOX_ENABLE
|
||
#define TCFG_TEST_BOX_ENABLE 0
|
||
|
||
#undef TCFG_AUTO_SHUT_DOWN_TIME
|
||
#define TCFG_AUTO_SHUT_DOWN_TIME 0
|
||
|
||
#undef TCFG_POWER_ON_NEED_KEY
|
||
#define TCFG_POWER_ON_NEED_KEY 0
|
||
|
||
#undef TCFG_UART0_ENABLE
|
||
#define TCFG_UART0_ENABLE DISABLE_THIS_MOUDLE
|
||
|
||
#endif
|
||
|
||
|
||
#define BT_FOR_APP_EN 0
|
||
|
||
//需要app(BLE)升级要开一下宏定义
|
||
#if CONFIG_APP_OTA_ENABLE
|
||
#define RCSP_BTMATE_EN 1
|
||
#define RCSP_UPDATE_EN 1
|
||
#define UPDATE_MD5_ENABLE 0
|
||
#else
|
||
#define RCSP_BTMATE_EN 0
|
||
#define RCSP_UPDATE_EN 0
|
||
#define UPDATE_MD5_ENABLE 0
|
||
#endif
|
||
|
||
|
||
#ifdef CONFIG_SDFILE_ENABLE
|
||
#define SDFILE_DEV "sdfile"
|
||
#define SDFILE_MOUNT_PATH "mnt/sdfile"
|
||
|
||
#if (USE_SDFILE_NEW)
|
||
#define SDFILE_APP_ROOT_PATH SDFILE_MOUNT_PATH"/app/" //app分区
|
||
#define SDFILE_RES_ROOT_PATH SDFILE_MOUNT_PATH"/res/" //资源文件分区
|
||
#else
|
||
#define SDFILE_RES_ROOT_PATH SDFILE_MOUNT_PATH"/C/"
|
||
#endif
|
||
|
||
#endif
|
||
#if TCFG_USER_EDR_ENABLE
|
||
#if RCSP_BTMATE_EN
|
||
#define CONFIG_BT_RX_BUFF_SIZE (3 * 512)
|
||
#define CONFIG_BT_TX_BUFF_SIZE (3 * 512)
|
||
#else
|
||
#define CONFIG_BT_RX_BUFF_SIZE (5 * 512)
|
||
#define CONFIG_BT_TX_BUFF_SIZE (5 * 512)
|
||
#endif
|
||
#else
|
||
#define CONFIG_BT_RX_BUFF_SIZE (0)
|
||
#define CONFIG_BT_TX_BUFF_SIZE (0)
|
||
#endif
|
||
|
||
#if (CONFIG_BT_MODE != BT_NORMAL)
|
||
////bqb 如果测试3M tx buf 最好加大一点
|
||
#undef CONFIG_BT_TX_BUFF_SIZE
|
||
#define CONFIG_BT_TX_BUFF_SIZE (6 * 1024)
|
||
|
||
#endif
|
||
#define BT_NORMAL_HZ CONFIG_BT_NORMAL_HZ
|
||
//*********************************************************************************//
|
||
// 时钟切换配置 //
|
||
//*********************************************************************************//
|
||
|
||
#define BT_NORMAL_HZ CONFIG_BT_NORMAL_HZ
|
||
#define BT_CONNECT_HZ CONFIG_BT_CONNECT_HZ
|
||
|
||
#define BT_A2DP_HZ CONFIG_BT_A2DP_HZ
|
||
#define BT_TWS_DEC_HZ CONFIG_TWS_DEC_HZ
|
||
|
||
//#define MUSIC_DEC_CLOCK CONFIG_MUSIC_DEC_CLOCK
|
||
//#define MUSIC_IDLE_CLOCK CONFIG_MUSIC_IDLE_CLOCK
|
||
|
||
#define BT_CALL_HZ CONFIG_BT_CALL_HZ
|
||
#define BT_CALL_ADVANCE_HZ CONFIG_BT_CALL_ADVANCE_HZ
|
||
#define BT_CALL_16k_HZ CONFIG_BT_CALL_16k_HZ
|
||
#define BT_CALL_16k_ADVANCE_HZ CONFIG_BT_CALL_16k_ADVANCE_HZ
|
||
|
||
//*********************************************************************************//
|
||
// 升级配置 //
|
||
//*********************************************************************************//
|
||
#if (defined(CONFIG_CPU_BR30))
|
||
//升级LED显示使能
|
||
//#define UPDATE_LED_REMIND
|
||
//升级提示音使能
|
||
//#define UPDATE_VOICE_REMIND
|
||
#endif
|
||
|
||
#if (defined(CONFIG_CPU_BR23) || defined(CONFIG_CPU_BR25))
|
||
//升级IO保持使能
|
||
//#define DEV_UPDATE_SUPPORT_JUMP //目前只有br23\br25支持
|
||
#endif
|
||
|
||
#if (defined(CONFIG_CPU_BR23) || defined(CONFIG_CPU_BR25) || defined(CONFIG_CPU_BD29) || defined(CONFIG_CPU_BD19) || defined(CONFIG_CPU_BR30) || defined(CONFIG_CPU_BR34))
|
||
#define USER_UART_UPDATE_ENABLE 0//用于客户开发上位机或者多MCU串口升级方案,请确保串口通信前已经退出powerdown,需要在对应的board添加初始化和唤醒口配置参考board_ac632n_demo.c
|
||
|
||
#define UART_UPDATE_SLAVE 0
|
||
#define UART_UPDATE_MASTER 1
|
||
|
||
//配置串口升级IO
|
||
#define UART_UPDATE_RX_PORT IO_PORTA_02
|
||
#define UART_UPDATE_TX_PORT IO_PORTA_03
|
||
|
||
//配置串口升级的角色
|
||
#define UART_UPDATE_ROLE UART_UPDATE_SLAVE
|
||
|
||
#if USER_UART_UPDATE_ENABLE
|
||
#undef TCFG_CHARGESTORE_ENABLE
|
||
#undef TCFG_TEST_BOX_ENABLE
|
||
#define TCFG_CHARGESTORE_ENABLE DISABLE_THIS_MOUDLE //用户串口升级也使用了UART1
|
||
#endif
|
||
|
||
#endif //USER_UART_UPDATE_ENABLE
|
||
|
||
#define FLOW_CONTROL 0 //AT 字符串口流控, 目前只有br30做了测试
|
||
|
||
|
||
#endif
|
||
|